Bug #1089
15号线车载CCTV插件,3*3分屏,在多屏都在播放视频的时候,切换全景摄像头,有时候程序会崩溃
Start date:
01/05/2021
Due date:
01/06/2021
% Done:
100%
Estimated time:
20.00 h
Defect version:
Description
全线车载cctv插件3*3分屏操作时，切换全景摄像头有可能导致ehmi异常停止.
如果分屏上播放的普通摄像头,则没有此问题.
Related issues
History
Updated by shixun yan about 4 years ago
- Related to Bug #1084: 全线车载cctv插件3*3分屏操作时，切换全景摄像头有可能导致ehmi异常停止 added
Updated by shixun yan almost 4 years ago
- Status changed from New to In Progress
- Assignee set to shixun yan
- Target version set to 3.0.4
Updated by shixun yan almost 4 years ago
1.在ehdbo里面增加一个新的设备类型 F1005_DEVTYPEID 为77, F1005_DEVTYPECODE 为PCamera ,F1005_DEVTYPEDESC 为全景摄像头.
2.在ehdbo里面的现场设备表->车辆15001->闭路电视,新增加一笔数据,F1004_DEVCODE为15001_Panoramic,F1005_DEVTYPEID选第一步里面新增的全景摄像头.其它选项照实填写.(需要更新libddbc.dll到最新版本,否则数据存入会失败)
3.在ehdbo里面的DI点表->车辆15001->闭路电视,将里面所有的全景摄像头的F1004_DEVCODE配置成第二步里面新增加的15001_Panoramic.(所有F4009_POINTDESC描述里面带有"全景"两个字,都可以认为是全景摄像头)
Updated by shixun yan almost 4 years ago
- Due date set to 01/06/2021
- Status changed from In Progress to Resolved
- Start date changed from 12/14/2020 to 01/05/2021
- % Done changed from 0 to 100
- Estimated time set to 20.00 h
如果已经有4个分屏正在使用全景摄像头播放视频,不允许用户再在其它分屏上播放全景摄像头视频.
会有提示对话框提示用户.